Cadet Electric Heater C051 User Manual

The Com-Pak Plus Manual Reset

replacement instructions

MODELS

The Com-Pak Plus

The Com-Pak Twin Plus

C202, C152, C122, C102, C072, CT402, CT302, CT408,

C151, C101, C051, C208

Note:

Now is the perfect opportunity to clean your heater. See

original product Owner’s Guide or go to www.cadetco.com

and find detailed cleaning instructions under Other Links for

the Com-Pak Plus.

•

TOOLS REQUIRED:

Small Flathead Screwdriver

Wire Connectors

Phillips Screwdriver

Wire Stripper

Wire Cutter

Crimping Tool

Cable or Wire Ties

Needle Nose Pliers

IMPORTANT INSTRUCTIONS

WARNING

Turn the electrical power off at the electrical panel board (circuit breaker or fuse box) and lock or

tag the panel board door to prevent someone from turning on power while you are working on the

heater. Failure to do so could result in serious electrical shock, burns, or possible death.

IF YOU ARE UNCOMFORTABLE WORKING WITH ELECTRICAL APPLIANCES, UNABLE TO FOLLOW THESE GUIDELINES,

OR DO NOT HAVE THE NECESSARY EQUIPMENT, CONSULT A LICENSED ELECTRICIAN.

1. It is important that you verify power has been turned off

and no power is going to the heater before proceeding.

Circuit breakers are often not marked correctly and

turning the wrong breaker off could mean electricity is

flowing to the heater, even if the heater does not appear

to be working.

2. Once you verify the power has been turned off correctly,

proceed to the next step.

3. Please see your product Owner’s Guide for additional

installation, operation and maintenance instructions for

both reset and heater. Owner’s Guides may be

downloaded at www.cadetco.com.

SAVE THESE INSTRUCTIONS

www.cadetco.com Tel: 360-693-2505 P.O. Box 1675 Vancouver, WA 98668-1675