Cabletron Systems Router 3G User Manual

MANUAL CONFIGURATION OF  
THE 3G BROADBAND ROUTER  
System Requirements  
Ensure the Vodafone Mobile Connect U740 datacard is inserted into the router before plugging in  
the power supply.  
Setting network preferences  
Connect one end of the supplied Ethernet cable into your network card/notebook and the other  
into one of the ports numbered 1 - 4 as highlighted below.  
Log into the router’s web interface by opening up your web browser and entering the router’s IP  
address “192. 168. 1. 1”, default user id is “admin” and the same for password.  
Logging in takes you to the “Basic Setup” screen, here you can set your preferred network e.g.  
3G Pr eferred”, “3G Only” or “G PRS Only”. From this screen you are also able to  
connect/disconnect from 3G/GPRS by selecting the “C onnect/Disconnect” button.  
 
Setting up wireless security  
Important: If you are going to have WiFi enabled on your router it is highly recommended that  
you also setup wireless security. To enable and setup wireless security select the “Wireless  
Security” tab and select “W EP” from the drop-down box (this is the most common form of  
Wireless security used).  
A new window will now open here you can now either create your own key (10 or 26  
alphanumerical digits depending on level of encryption selected), or you can enter a  
Paraphrase” which will automatically generate a key for you. Example as below:  
Select “Save S ettings” and the key will be applied and the router will restart automatically  
Connecting to your 3G Broadband Router  
wirelessly (Windows XP)  
The following steps outline what you need to do to connect to your securely configured router via  
WiFi.  
Ensure your router is powered up and you have followed all the steps required to configure and  
enable WiFi. You also need to ensure that wireless is both installed and enabled on the device you  
wish to connect to the router.  
Your computer should automatically detect the new wireless network when in range, to view the  
network right-click on the wireless connection icon in your system tray and select “View available  
Wireless Networks” as shown below:  
 
You will now have a list of available networks displayed. Select the name that corresponds to your  
router by double-clicking on it.  
You will now be prompted for the WEP key you setup previously, you will need to enter the key  
twice and select “C onnect”.  
Your connection will now be setup and you will be able to access the router’s web interface and  
connect to the internet.  
Your computer will remember this connection along with the key so each time the router is  
powered up and you are within range you will be able to connect easily.  
 
Connecting to your 3G Broadband Router  
through WiFi (Macintosh)  
Firstly ensure your router is powered up and you have followed all the steps required to configure  
and enable WiFi.  
Check that wireless is both installed and enabled on your Mac. To check you will need to click on  
the Wireless icon and select “Tur n Airport on”.  
Your Mac should automatically detect the new wireless network when in range, to view the  
network click on the Airport icon and select the name of your network from the list:  
You will now need to enter the password (key) you setup on the router previously in order to  
be able to connect. You are able to select “Rem ember password in my keychain” which will  
allow you to connect again automatically each time you are in range.  
 
Configuring APN’s  
In some cases you may need to manually configure which APN your router uses to connect to  
the internet or your work network.  
To change the APN, you will first need to log into the routers web interface. Select the “3G/UM TS  
Network” tab:  
Under “APN S election Mode” select “C ustom Values”. You will now see three new fields  
appear (“A PN Nam e”, “User Nam e” & “Password”  
You will now need to enter the APN you wish to use in the “APN Name” box. You will not  
need to enter a username and password. Select “Save Settings” by scrolling down to the end of  
the screen:  
 

Beko Washer WCY 71232 HPTL User Manual
Belkin Network Router 8820AU00370 User Manual
BenQ Projector Accessories MX716 User Manual
Bosch Appliances Intercom System 0 User Manual
Bradley Smoker Plumbing Product WF2605 User Manual
Briggs Stratton Lawn Mower S21 User Manual
Briggs Stratton Pressure Washer 01802, 01804 User Manual
Cary Audio Design Home Theater System Cinema 11 User Manual
C Crane Portable Radio PR D4VW User Manual
Celestron Telescope 80ED User Manual